Tweet
Small video of the new mancave space....in a total mess of course.
Cabinet should be up and running soon....
https://www.youtube.com/watch?v=to7ORJ7BXrI
Cabinet should be up and running soon....
https://www.youtube.com/watch?v=to7ORJ7BXrI
-
-
Ok, so now I'm a much happier man. My mancave is mostly up and running. PinKadia is alive again, and the simpit is shaking the house again after a long absence...*driving my wife crazy!
Here's a video tour describing what I have, and how everything works and is wired together and how VR is setup to work with everything. I show off the simpit and how my 12 transducer telemetry feedback setup works and you also get to "hear" how it works too! It is amazing combined with VR!
https://www.youtube.com/watch?v=jKHKb9YML8w
If want to skip right to the simpit demo then go here....
https://youtu.be/jKHKb9YML8w?t=5m2s
Just waiting for the new TV to get replaced, then I'll make a stand for that to go over the simpit to bring the screen closer. *Then the last screen and game consoles will go the the unused space.Comment
-
A day of greatness is upon us....
DOFLinx will soon support triggering "any" DOF device and command.
This means that finally.... addressable leds (MX), will work with Future Pinball and Pinball FX2!
Here's a coming soon "reveal" video I made.... "Let there be light!"
https://www.youtube.com/watch?v=gWucVfHcyPc
Comment
-
Masters of the Universe: Mastered. DOFLinx MX Cabinet Edition
You have the power of the ultimate light show in a pinball cabinet! This is the first Future Pinball table to use addressable leds thanks to the new DOF led MX support in DOFLinx 5.20!
You have never seen a light show quite like this in a pinball cabinet! Amazing effects and animation that surround the playfield!
A video demonstration can be seen here in my cabinet:
https://www.youtube.com/watch?v=b62481X_edk
This table has the complete cabinet feedback and lighting support for the following:
- 10 solenoids for flipper, slingshots, bumpers, etc..
- 5 RGB flashers
- Blower Fan
- Shaker
- Gear motor
- Strobe
- Beacon
- Start button
- Coin button
- Launch Ball button
- RGB Undercab Lighting
- Addressable leds
Requirements:
- DOF R3 installed (for DOFLinx cabinet feedback and lighting) and addressable leds already setup and working (for MX led effects).
- DOFlinx 5.20 or higher is REQUIRED, even if you don't have addressable leds.
- addressable leds are NOT required to play this table, but they are HIGHLY recommended.
- to use the addressable leds with this table you must have your DOF "config" files updated by using DOF Config Tool! (just like you would for Visual Pinball)
To play a Future Pinball table with addressable leds support (DOFLinx MX):
- update DOFLinx as per normal (must be 5.20 or higher). Make sure you copy over the new DOFLinx.vbs to "Future Pinball \ Scripts".
- add DIRECTOUTPUTGLOBAL=c:\DirectOuput\Config\GLobalCon fig_b2sServer.xml (assuming you have it there) to your DOFLinx.ini file.
- download the awesomeness of a Future Pinball DOFLinx MX table
- check DOF Config Tool to see if support for that table has been added to it yet (you will see FP tables start with "FP:") If there are no DOF commands showing for that table, its not supported yet.
- "Generate" a new Config File (containing directoutputconfig30.ini in the zip) and copy the new files to your "DirectOutput \ Configs" folder.
- play the epicness that is Future Pinball with DOFLinx cabinet feedback and addressable leds!
DOFLinx 5.20+ download link:
http://www.vpforums....&showfile=12318Comment
-
Star Wars Death Star Assault (Ultimate): DOFLinx MX Cabinet Edition
Witness the most explosive light show in a pinball cabinet thanks to the new DOF addressable led MX support in DOFLinx 5.20!
You have never seen a light show quite like this in a pinball cabinet! Amazing effects and animation that surround the playfield!
- Lightsabers,
- explosions
- X-Wing and Tie-Fighter Blasters
- flashing words like SPECIAL, PADAWAN, JEDI, SOLO
- targetting computer
- video mode
A video demonstration in my cabinet can be seen here:
https://www.youtube.com/watch?v=16BFc4BqsJE&t=
This table has the complete cabinet feedback and lighting support for the following:
- 10 solenoids for flipper, slingshots, bumpers, etc..
- 5 RGB flashers
- Blower Fan
- Shaker
- Gear motor
- Strobe
- Beacon
- Start button
- Coin button
- Launch Ball button
- Fire button
- RGB Undercab Lighting
- Addressable ledsLast edited by TerryRed; 09-26-2017, 01:36 AM.Comment
-
Since I haven't really done any FX2 videos for DOFLinx, I think the new release of 5.20 which supports addressable leds makes this a good reason to have a video demonstration.
DOFLinx is part of the complete cabinet experience for Pinball FX2!
-addressable leds
-B2S active backglass
-full DOF feedback and lighting support
Add in freezy's dmdext for virtual DMD (clean round dots) or real DMD support
https://www.youtube.com/watch?v=OaaCgYo-In4
Last edited by TerryRed; 09-26-2017, 08:59 PM.Comment
-
Retroflair: DOFLinx MX Cabinet Edition
Wipeout: DOFLinx MX Cabinet Edition
Witness a modern light show in a retro theme, thanks to the new DOF addressable led MX support in DOFLinx 5.20!
A video demonstration in my cabinet can be seen here:
https://www.youtube.com/watch?v=mQsMrSB9UCs
These tables have the complete cabinet feedback and lighting support for the following:
- 10 solenoids for flipper, slingshots, bumpers, etc..
- 5 RGB flashers
- Blower Fan
- Shaker
- Gear motor
- Strobe
- Beacon
- Start button
- Coin button
- Launch Ball button
- RGB Undercab Lighting
- Addressable ledsComment
-
Finally, my new screen has come in. Upgraded to a 43 inch 4K TV, and it looks beautiful. Everything is crisp and clean and smooth, no lag. Here's an updated video of the Gameroom and TerryRed Studios.....*
https://www.youtube.com/watch?v=ypmCuaRNo7A&t=
Comment
-
OK...so with Stranger Things Season 2 about to start... I thought something could use an addressable leds update! I asked ScottyWic if it would be ok for me to add custom addressable leds triggers to the table and DOF MX code to the table script and he said go for it!
So I did!
Note, I didn't replace or change the normal DOF (I did fix a couple DOF trigger errors). I added completely different trigger commands and "E" numbers used only for DOF MX leds. This allowed me to do whatever I wanted without interfering with what was already there. It also allows anyone who doesn't like what I did to simply erase the "MX commands" for their custom config for the table in DOF Config Tool...and simply "Generate Basic MX Config" to go back to the Basic MX Flashers emulation....but who would want that?
The new table version 2.2 (with my DOF MX updates) was submitted to ScottyWic, so he'll be uploading it soon. I also submitted the "all new" DOF MX commands to DOF Config Tool (which REQUIRES 2.2) which is waiting approval.
What would a TerryRed update be without a video.... here is a demo of my DOF MX mod of Stranger Things 2.2:
https://www.youtube.com/watch?v=VBSczH0jMy0
Comment
-
I've been a busy boy for the last few weeks...
I'm helping Nailbuster test a new front end he's been working on called PinUP Popper!
It's made for virtual pinball, but also can be used for probably most emulator systems, or PC Games as well.
The video does a better job at explaining it than my typing...
https://www.youtube.com/watch?v=sATve1Z4mxE
...cool stuff.Comment
-
-
Stranger Things: Stranger Edition!
A video demo of ScottyWic's fantastic Stranger Things: Stranger Edition table for VPX..... featuring DOF, MX Leds, and PinUP Player awesomeness!
https://www.youtube.com/watch?v=bDXil3NVN7U&t
Comment
-
Comment
-
-
So...now that I had some time....yes...after 3 years...the cab is shaking!!! I finally installed a real Stern Shaker Motor.
https://www.youtube.com/watch?v=kWQPze_ZK00
Comment
Comment