Post all bugs here

[MilliElektra]

Bug on Nintendo Switch

I delete this after a week as all bugs which I upload there.
Arabien Nights Fireball

https://twitter.com/ElektraMilli/status/1241778918043963392?s=20

Fireball not animated even though genie is animated. I didn’t switched the animation off

[MilliElektra]

Nintendo Switch Leaderboards offline?

Since days I try to get in.

[ATARI]

Xbox one flippers

Any news when issues to be fixed. Top right flipper Black Rose angle out and then disappears, Right flipper on Cirqus Voltaire angle goes out. Played Jurassic World upper right flipper angle goes out. No Good Gofers upper right flipper same problem angle goes out. Played on xbox one

[sui99]

Skyrim & Main Menu Bugs (PS4)

Hi there,

I encountered the following two bugs on the Skyrim table:

1) Lockpicking straight up doesn't work. Everytime I encounter a locked chest, the screen that is supposed to bring up the lockpicking minigame just stays black. I can see the DMD describing what I'm supposed to do and I can quit the mode but I can't pick the lock (since there is no lock on screen ^^). Lockpicks also don't break if I attempt to do it blindly but I can hear the sounds of turning the lockpick and trying to pick it.

2) Sometimes the game doesn't pause when you enter the inventory. You remain within the inventory and can't use the flippers until you actually leave the inventory manually. It is displayed on the regular DMD instead of the middle of the screen and a lot of the visuals (texts) are completely messed up. I assume this happens when you enter the inventory while the ball is locked in a sinkhole or is off the table by some other means.

In the main menu (collection screen), a weird bug appeared out of nowhere:

3) Whenever I favorite a table, the entire collection disappears / goes invisible. There are no more icons for tables, the screen is just empty. Quitting to the main menu and going back to collections solves the issue. This hasn't been the case in the past and is either related to one of the latest updates (Universal Pack / Williams Vol.5) or to too many tables favorited by me (I use the favorite feature to keep track of tables I have beaten the wizard mode on; I think there's currently 30+ tables in there... xD)

[Macotar]

Circus Voltaire PC Steam Ball Save time upgrade doesn't

I've been trying to Blue star this machine. I get multi ball all the time. This activates the ball save. But it doesn't count towards the ball save bonus. It used to. I'm at level 8 on ball save and every time I see the ball save light flash I think I'll break through. Either this is a bug, or this ball save is a very specific ball save that I don't realize. Help.

[Macotar]

Update

I've been trying to Blue star this machine. I get multi ball all the time. This activates the ball save. But it doesn't count towards the ball save bonus. It used to. I'm at level 8 on ball save and every time I see the ball save light flash I think I'll break through. Either this is a bug, or this ball save is a very specific ball save that I don't realize. Help.

So it appears that I can get the upgrades if I don't use the ball save bonus. If I do use it it won't record ball saves.

[Linne_Zen]

Thanks for the finds guys, I forwarded them to the developers. Have a nice weekend!

[Linne_Zen]

So it appears that I can get the upgrades if I don't use the ball save bonus. If I do use it it won't record ball saves.

Here you can find the detailed guide for Cirqus Voltaire where you can find information about multiball and ball saves: http://blog.zenstudios.com/press/ass...nToTheChin.pdf

[Fierr0]

Flipper gets stuck when using a Power

Hi, I play in PlayStation 4. As we know, if we press the L1 button in the PS4 controller, the Left flipper moves up, and the same case with the R1 button. If I don't release the L1 or R1 button, then the flipper keeps up. Until I release the button, the flippers gets down.

The bug that I detected occurs when I use the REWIND Power and I'm pressing a flipper at the same time. When I stop the REWIND Power to keep playing, I used to release the flippers buttons too, but the flippers don't get down, they keep up and get stuck, like if I were pressing the buttons.

It happens many times in any table and to fix it I need to press the L1 or R1 button again to release the flippers.

I don't know if this bug has been commented yet.

Thanks for your attention.

[cantankerous--]

Hi, I play in PlayStation 4. As we know, if we press the L1 button in the PS4 controller, the Left flipper moves up, and the same case with the R1 button. If I don't release the L1 or R1 button, then the flipper keeps up. Until I release the button, the flippers gets down.

The bug that I detected occurs when I use the REWIND Power and I'm pressing a flipper at the same time. When I stop the REWIND Power to keep playing, I used to release the flippers buttons too, but the flippers don't get down, they keep up and get stuck, like if I were pressing the buttons.

It happens many times in any table and to fix it I need to press the L1 or R1 button again to release the flippers.

I don't know if this bug has been commented yet.

Thanks for your attention.

Been reported a billion times.................good luck getting this one fixed bro.

[Fierr0]

Been reported a billion times.................good luck getting this one fixed bro.

Jejeje ok,

[Fierr0]

X button Bug

Hi Zen Studios, I play with the PS4 console, and I have detected a couple of bugs using the X button in my control.

In the tables with a plunger, to start a game I can use the right stick or the X button. The bug that I have detected occurs when I press the X button to launch the plunger. If I keep pushing the X button, the plunger gets crazy and it moves like if I were pressing the X button repeatedly. This problems happens many times, but there is another problem, when I press the X button, this one is not detected. I press the X button and nothing happens until few seconds, but in the worst case I have to leave the game and start again.

The second problem occurs in the SECRETS OF THE DEEP table. When I activate the Periscope Sink Hole, and it starts to spin, I have to press the X button to shoot the ball out of the periscope, so I press the X button and NOTHING HAPPENS!!!! I press repeatedly the X button but nothing happens, so the spin of the periscope ends to spin and shoot the ball automatically. This problems happens occasionally, not allways.

Anyone has detected these problems too? Are these problems commented yet? @cantankerous-- do you have these problems too?

Thanks for your attention.

[OU7CAS7]

Wolverine

Just today when I was playing the Wolverine table, I was on the fast ball mode, and the ball flew off of the table somehow. I can't remember how it happened exactly, but it somehow rebounded off of the back of the table, and then flew towards me and then off. I was expecting another ball to be loaded into the launcher after 10 seconds or so... it didn't happen. Usually the game detects that the ball is motionless, and then places a fresh ball in the launcher. Tried nudging the table then waiting, didn't work. Tried tilting the table, but then the game seemed to get stuck in a Tilt loop, where it just didn't do anything else except continue the buzzing sound and flashing "Tilt" on the dot matrix screen. Luckily, I didn't have an overly big score at the time.

This is certainly not the first time I have seen it happen on tables in Pinball FX3, so Zen is going to need to do better with the game's physics in that regard. I can see how it could be amusing at times, but not when you spend time getting close to or beyond a high-ranking score on the leaderboard, only for the game to lock up on you. I suspect placing an invisible barrier along the very top of the table might help to keep the ball in and stop this problem on many tables, much like how the glass on a real pinball table would stop the ball from flying out.

[OU7CAS7]

Fish Tales

I was playing the Fish Tales tables today, Arcade Mode. I was just about to start on my third main ball, and then this error popped up:

Fish Tales Pinball - Exception.jpg

I clicked the close button, and the game exited.

[MilliElektra]

Cirqus Voltaire

Endless loop...On Nintendo Switch

https://twitter.com/elektramilli/status/1256727374705520640?s=21