Post all bugs here

[wims_Beta]

Hello @Linne_Zen !

Well it takes me a long time to login here again. And the most important thread for me is this one.

Honestly most of the fans there were here to report bugs, they give up, because there's no one to answer them, and nothing is fixed since years.

I just see today Zen seems to have more interest of these thread, because of your presence. It's a good thing. So if you need some help, you can count on me.

You can see all the bugs in video here :

http://www.lupsclub.com/t1935-liste-des-bugs

(i give up to send them here)

[grenadier]

1. Alt-F4 on Steam version crashes the game, instead of closing the app like it does on almost every other Windows app in existence.
2. Had music on Bluetooth headphones. Turned off Bluetooth headphones. Instead of sound going to Speakers as the default audio device, the game crashed.
3. Bug with remembering the last camera position STILL hasn't been fixed.

[ATARI]

Thank you very much for the finds, I forwarded them to the developers! Have a nice weekend!

Whats been done about the Flippers going off angle.

[OU7CAS7]

Hi! Could I ask on which platform did you experience this problem?

Hey Linne. It's Windows 10.

I think I may actually put in some of my laptop's specifications in my signature if I can, just to make it quicker and easier for Zen staff to know what I'm using...

[Linne_Zen]

Appreciated

Thank you very much for the finds, I forwarded them to the developers! Have a nice weekend!

[Linne_Zen]

Hi Zen Studios, I play with the PS4 console, and I have detected a couple of bugs using the X button in my control.

In the tables with a plunger, to start a game I can use the right stick or the X button. The bug that I have detected occurs when I press the X button to launch the plunger. If I keep pushing the X button, the plunger gets crazy and it moves like if I were pressing the X button repeatedly. This problems happens many times, but there is another problem, when I press the X button, this one is not detected. I press the X button and nothing happens until few seconds, but in the worst case I have to leave the game and start again.

The second problem occurs in the SECRETS OF THE DEEP table. When I activate the Periscope Sink Hole, and it starts to spin, I have to press the X button to shoot the ball out of the periscope, so I press the X button and NOTHING HAPPENS!!!! I press repeatedly the X button but nothing happens, so the spin of the periscope ends to spin and shoot the ball automatically. This problems happens occasionally, not allways.

Anyone has detected these problems too? Are these problems commented yet? @cantankerous-- do you have these problems too?

Thanks for your attention.

Hi! Could I ask if you experience this x button problem on every table? Is it possible for you to try it with another controller?

[Linne_Zen]

Stuck on the Return of the Jedi table. I had just completed the fourth mission. Before shooting the last target for the Tie Fighter, there was only one ball left. I'm not sure if that's correct or not (I suspect not), but I decided to continue playing anyway. Got the target, was given the reward points for completing the mission, and then the game failed to give me my ball back. Tried nudging and tilting... nothing. So, now I'm stuck at 1.5 billion points, and I can't do anything. Again.

Please start fixing these issues. I will not buy any more tables until they are fixed!

[ATTACH=CONFIG]1518[/ATTACH]

Hi! Could I ask on which platform did you experience this problem?

[Linne_Zen]

Endless loop...On Nintendo Switch

https://twitter.com/elektramilli/sta...705520640?s=21

Could I ask what action happened before you experienced this problem?

[OU7CAS7]

Star Wars Pinball: Episode VI Return of the Jedi

Stuck on the Return of the Jedi table. I had just completed the fourth mission. Before shooting the last target for the Tie Fighter, there was only one ball left. I'm not sure if that's correct or not (I suspect not), but I decided to continue playing anyway. Got the target, was given the reward points for completing the mission, and then the game failed to give me my ball back. Tried nudging and tilting... nothing. So, now I'm stuck at 1.5 billion points, and I can't do anything. Again.

Please start fixing these issues. I will not buy any more tables until they are fixed!

Star Wars - Return of the Jedi - No ball return.jpg

[sui99]

Captain America Attack bugged on Civil War (PS4)

In addition to the gamebreaking bugs from my other thread, a comparatively minor annoyance on Civil War:

During Captain America attack mode (the one that's triggered via the whirlpool) the first shot you're supposed to make sometimes simply doesn't register.

You are supposed to hit a red target to the right of the whirlpool (I think it's the ramp that also starts fights) but even a full force, clean hit sometimes doesn't register as a successful shot. I managed to hit that thing cleanly 4-5 times during a single mode and it's safe to say that it just bugs out sometimes. I have no idea what may cause this, it seems pretty random. Maybe hitting the target the second the mode starts (you can hit the target before the table is ready - despite the target already being there, there seems to be a short delay before you can acutally hit it and have it register as a hit). At least that's the only thing I can think of. It happened to me about 1 out of 5 times I played that mode; so, it's been a pretty frequent issue.

[MilliElektra]

Cirqus Voltaire

Endless loop...On Nintendo Switch

https://twitter.com/elektramilli/status/1256727374705520640?s=21

[OU7CAS7]

Fish Tales

I was playing the Fish Tales tables today, Arcade Mode. I was just about to start on my third main ball, and then this error popped up:

Fish Tales Pinball - Exception.jpg

I clicked the close button, and the game exited.

[OU7CAS7]

Wolverine

Just today when I was playing the Wolverine table, I was on the fast ball mode, and the ball flew off of the table somehow. I can't remember how it happened exactly, but it somehow rebounded off of the back of the table, and then flew towards me and then off. I was expecting another ball to be loaded into the launcher after 10 seconds or so... it didn't happen. Usually the game detects that the ball is motionless, and then places a fresh ball in the launcher. Tried nudging the table then waiting, didn't work. Tried tilting the table, but then the game seemed to get stuck in a Tilt loop, where it just didn't do anything else except continue the buzzing sound and flashing "Tilt" on the dot matrix screen. Luckily, I didn't have an overly big score at the time.

This is certainly not the first time I have seen it happen on tables in Pinball FX3, so Zen is going to need to do better with the game's physics in that regard. I can see how it could be amusing at times, but not when you spend time getting close to or beyond a high-ranking score on the leaderboard, only for the game to lock up on you. I suspect placing an invisible barrier along the very top of the table might help to keep the ball in and stop this problem on many tables, much like how the glass on a real pinball table would stop the ball from flying out.

[Fierr0]

X button Bug

Hi Zen Studios, I play with the PS4 console, and I have detected a couple of bugs using the X button in my control.

In the tables with a plunger, to start a game I can use the right stick or the X button. The bug that I have detected occurs when I press the X button to launch the plunger. If I keep pushing the X button, the plunger gets crazy and it moves like if I were pressing the X button repeatedly. This problems happens many times, but there is another problem, when I press the X button, this one is not detected. I press the X button and nothing happens until few seconds, but in the worst case I have to leave the game and start again.

The second problem occurs in the SECRETS OF THE DEEP table. When I activate the Periscope Sink Hole, and it starts to spin, I have to press the X button to shoot the ball out of the periscope, so I press the X button and NOTHING HAPPENS!!!! I press repeatedly the X button but nothing happens, so the spin of the periscope ends to spin and shoot the ball automatically. This problems happens occasionally, not allways.

Anyone has detected these problems too? Are these problems commented yet? @cantankerous-- do you have these problems too?

Thanks for your attention.

[Fierr0]

Been reported a billion times.................good luck getting this one fixed bro.

Jejeje ok,