Results 1 to 2 of 2

Thread: problem with CABINET MODE the backglass screen and DMD does not work

  1. #1
    Junior Member
    Join Date
    Oct 2017
    Posts
    3

    Default problem with CABINET MODE the backglass screen and DMD does not work

    Hi i have a problem with CABINET MODE . the backglass screen and DMD does not work in my second monitor this is 1980x1020...

    I've added the image is correct folder with same name with the table

  2. #2
    Junior Member
    Join Date
    Oct 2017
    Posts
    3

    Default

    Quote Originally Posted by ababapanos View Post
    Hi i have a problem with CABINET MODE . the backglass screen and DMD does not work in my second monitor this is 1980x1020...

    I've added the image is correct folder with same name with the table

    I have the backglass and the DMD both working correctly. Keep in mind that many of the table names have changed slightly from FX2.

    In the folder ..Steam\Steamapps\common\Pinball FX3 \data\steam there are a ton of .pxp files, and I have placed in there a PNG file for each table's backglass.

    In addition you need to run the cabinet mode configuration to see anything. The program does not no where to display the images by default. So in my setup where I have a 1600x1200 monitor placed above my table (with the left edge aligned to my main monitor in windows monitor layout) The X:Y Position Of my backglass is 0:-1200, and the width and height are set to 1600x900. Makes perfect use of 16:9 images in the top 3/4 of my 4x3 monitor.

    Hope some of this helps. Good luck.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •