Results 1 to 2 of 2

Thread: How to get Playfield off my Backglass

  1. #1
    Junior Member
    Join Date
    Jun 2018
    Posts
    4

    Default How to get Playfield off my Backglass

    I have my cabinet setup with the Backglass as the primary monitor...it's labeled #2. My Playfield monitor is #1. Both monitors are in landscape mode which works best for most virtual pinball programs out there. Pinball FX3 is starting up on my Backglass and I don't see a setting to move it to the other monitor. There are settings to move the DMD and the Backglass but not the main playfield.
    Last edited by Gilrock; 07-04-2018 at 04:18 AM.

  2. #2
    Community Representative Chili's Avatar
    Join Date
    Mar 2018
    Posts
    197

    Default

    Hey Gilrock!

    Please follow these steps:

    1. Check which is your primary display. If you are not sure which one it is, check it in Windows\System\Display settings.

    2. Set some dimensions to your DMD and Backglass. Set the Dot matrix / Backglass horizontal and vertical size to the desired values.Our DMD uses a 4:1 aspect ratio.

    3. Place your DMD and Backglass images. They should be placed in a 2-dimensional Cartesian coordinate system, where the origin is your primary display’s top left corner and the unit of length is a pixel. (By default (0;0) they are hidden beneath the game.) So, the placing of the images depends on your displays’ resolution and positions compared to each other.

    Hope it helps!

    Have a nice day!

    Zsofia

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •