Results 1 to 2 of 2

Thread: Playfield Sides Cut Off in Portrait Mode

  1. #1
    Junior Member
    Join Date
    Oct 2018
    Posts
    3

    Default Playfield Sides Cut Off in Portrait Mode

    I've been experimenting with Adventureland in cabinet mode using a gaming laptop display as the backglass/dmd and a 1920x1080 external display (rotated 90 degrees) as the playfield. If I choose the external display's native resolution, which has a 16:9 aspect ratio, the left and right sides of the playfield are off screen. If I choose a lower resolution with an aspect ratio of 4:3, the playfield sides are visible, but, obviously, the resolution isn't as good. Is there a fix for this? It seems to me the playfield should render properly, in portrait mode, with high resolution. Please ignore the backglass in the images below (I didn't bother to adjust it's size and position when changing resolutions).

    IMG_2991.jpgIMG_2992.jpg

  2. #2
    Junior Member
    Join Date
    Oct 2018
    Posts
    3

    Default

    Just an update. I found and changed a setting on my playfield monitor. It helps a bit. The image below is 1920X1080 (16:9) with the monitor's "Screen Fit" setting turned on.

    IMG_3010.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •