Results 1 to 4 of 4

Thread: Possible to Have Dot Matrix Positions Specific To Each Table?

  1. #1
    Junior Member
    Join Date
    Apr 2019
    Posts
    3

    Default Possible to Have Dot Matrix Positions Specific To Each Table?

    I have cabinet mode enabled and two monitors set up, and everything looks great.

    I have only acquired backglass art for Attack From Mars and I was able to position the backglass and the dot matrix perfectly.

    This got be thinking, does the dot matrix position have to be the same for each table? If I acquire backglass art for Fish Tales and if that Fish Tales backglass art has a spot for the dot matrix display that is 100 pixels higher or lower than the spot that worked for Attack from Mars, am I out of luck? Obviously if this is the case, that the dot matrix position has to be the same for each table, that would mean it's a requirement to acquire or edit backglass art to meet this criteria.

    Alternately, and this is what I'm hoping, in Pinball FX3 settings when I go and set the dot matrix position for any one table, does Pinball FX3 save that position as specific to that table?

    I haven't tested this yet and I will ASAP, but I thought I'd ask to get a clear answer from the community and not risk just doing it wrong and assuming the wrong thing.

  2. #2
    Junior Member
    Join Date
    Aug 2019
    Posts
    1

    Default

    Quote Originally Posted by ph349397 View Post
    This got be thinking, does the dot matrix position have to be the same for each table? If I acquire backglass art for Fish Tales and if that Fish mcdvoice Tales backglass art has a spot for the dot matrix display that is 100 pixels higher or lower than the spot that worked for Attack from Mars, am I out of luck?
    I am still learning and observing. From here i want to know the same question on matrix dot
    Last edited by gandrew; 08-10-2019 at 05:24 PM.

  3. #3
    Member PinballVirtual-Victor's Avatar
    Join Date
    Aug 2016
    Location
    Palamós - Girona - Spain
    Posts
    72

    Default

    If you use 2 screens, Download or made a Backglass set with Standart DMD, with all speaker paneles or DMD places at same size and position.
    Simply.

  4. #4
    Junior Member
    Join Date
    Apr 2019
    Posts
    3

    Default

    Quote Originally Posted by PinballVirtual-Victor View Post
    If you use 2 screens, Download or made a Backglass set with Standart DMD, with all speaker paneles or DMD places at same size and position.
    Simply.
    Thanks. Yeah that's what I suspected, I'll need to tailor my backglass art so that all the rectangles for the dot matrix displays are in the exact same poisition. Thanks for the feedback.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •