I have just tried using PinballX (i know im behind the times), i used the setup wizard and believe that i have set the correct paths for the Pinball FX 2 settings, but upon loading PinballX there are no tables listed what so ever. Here is my config file....

Code:
[Display]
Monitor=0
rotate=0
Windowed=False
WindowWidth=480
WindowHeight=720
WindowX=0
WindowY=65
PlayFieldBrightness=230
WheelTextColor=ffffffff
WheelTextOutlineColor=ff000000
InfoTextColor=ffffffff
InfoTextOutlineColor=ff000000
FilterTextColor=ffffffff
FilterTextOutlineColor=ff000000
MenuColor=ffffa500
[BackGlass]
monitor=1
x=0
y=0
width=1280
height=1024
[DMD]
Enabled=False
monitor=2
x=0
y=0
width=900
height=300
[FileSystem]
EnableFileMatching=True
[Interface]
DesktopModeEnabled=True
EnableAdditionalDetail=True
ShowSystem=True
ShowRatings=True
[Audio]
StreamVolume=90
SampleVolume=90
PlaySoundInVideos=True
[Startup]
playsound=False
playvideo=False
StartWithWindows=No
[KeyCodes]
quit=27
left=37
right=39
select=13
rotate=82
pageleft=33
pageright=34
exitemulator=27
ingame=80
screenshot=83
screenshotbackglass=66
instructions=73
[JoyCodes]
quit=10
left=0
right=1
select=2
rotate=3
pageleft=4
pageright=5
exitemulator=6
ingame=13
instructions=14
[Text]
Line1=Free Play
Line2=Press Start
[FuturePinball]
Enabled=False
WorkingPath=h:\-PINBALL-\-FUTURE PINBALL-
TablePath=h:\-PINBALL-\-FUTURE PINBALL-\Tables
Executable=Future Pinball.exe
Parameters=/open "[TABLEPATH]\[TABLEFILE]" /play /exit /arcaderender
LaunchBeforeEnabled=false
LaunchBeforeWorkingPath=
LaunchBeforeExecutable=notepad.exe
LaunchBeforeHideWindow=False
LaunchBeforeWaitForExit=True
LaunchAfterEnabled=False
LaunchAfterWorkingPath=
LaunchAfterExecutable=notepad.exe
LaunchAfterHideWindow=False
LaunchAfterWaitForExit=True
MouseClickFocus=True
[VisualPinball]
Enabled=False
WorkingPath=h:\-PINBALL-\- VISUAL PINBALL -
TablePath=h:\-PINBALL-\- VISUAL PINBALL -\Tables
Executable=VPinball_9_0_2.exe
Parameters=/play -"[TABLEPATH]\[TABLEFILE]"
LaunchBeforeEnabled=false
LaunchBeforeWorkingPath=
LaunchBeforeExecutable=notepad.exe
LaunchBeforeHideWindow=False
LaunchBeforeWaitForExit=True
LaunchAfterEnabled=False
LaunchAfterWorkingPath=
LaunchAfterExecutable=notepad.exe
LaunchAfterHideWindow=False
LaunchAfterWaitForExit=True
[ExitScreen]
Enabled=True
EnableExit=True
EnableShutdown=True
[StartupProgram]
Enabled=false
WorkingPath=
Executable=notepad.exe
Paramaters=
HideWindow=true
WaitForExit=false
[ExitProgram]
Enabled=false
WorkingPath=
Executable=notepad.exe
Paramaters=
HideWindow=False
WaitForExit=
[AttractMode]
Enabled=True
Timer=1
ShowFor=15
[System_1]
Name=Pinball FX2
Enabled=True
WorkingPath=D:\Program Files (x86)\Steam\SteamApps\common\Pinball FX2
TablePath=D:\Program Files (x86)\Steam\SteamApps\common\Pinball FX2\data_steam
Executable=Pinball FX2.exe
Parameters=
LaunchBeforeEnabled=True
LaunchBeforeWorkingPath=D:\PinballX\Scripts
LaunchBeforeExecutable=Pinball FX2.exe
LaunchBeforeHideWindow=False
LaunchBeforeWaitForExit=False
LaunchAfterEnabled=True
LaunchAfterWorkingPath=D:\PinballX\Scripts
LaunchAfterExecutable=ledset.bat
LaunchAfterHideWindow=True
LaunchAfterWaitForExit=False
LaunchBeforeParameters=[TABLEFILE]
Does anything look correct??

I noticed that there wasn't a 'Scripts' folder when i installed PinballX, so i created one, but does anything need to go in there to get the tables to show up at all?, any help would be much appropriated!